PCCLONE EX LITE FAILING FOR MAC
PCCLONE EX LITE FAILING DRIVERS
PCCLONE EX LITE FAILING UPDATE
PCCLONE EX LITE FAILING PC

Using this cable for copying files back and forth between 2 drives and your desktop PC/Mac is pretty much the same as using the previous version of this product. I was very happy with the performance during my tests. I also ran the same tests on my iMac, and received similar results. These numbers really donвЂ™t mean anything though, because everything depends on the speed of the drives and the speed of your computer.

PCCLONE EX LITE FAILING PC

The test file that I used for all of the transfer tests was a video of the Napoleon Dynamite movie.ДЇile copy from PC to Hitachi SATA 5 seconds File copy from PC to 2.5 Toshiba IDE 32 seconds File copy from Hitachi SATA to PC 7 seconds File copy from Hitachi SATA to 2.5 Toshiba IDE 33 seconds File copy from 2.5 Toshiba IDE to Mac 12 seconds File copy from 2.5 Toshiba IDE to Hitachi SATA 6 seconds I used a Windows XP PC for these tests. I had no problems copying files, moving files, running programs, watching videos or listening to audio files using this adapter and the test drives. The answer is YES, you can connect them, but they wonвЂ™t work. You might be wondering if it is possible to connect 2 IDE devices at the same time to this adapter. Maybe the next version of this adapter will have the power switch on the opposite side of the brick. The small Blue power light on the power brick remains lit even when it is not supplying power to the adapter. The only bad thing about the power switch is the fact that the only way you really know if the drives are powered off, is by feeling them for vibrations, listening for whirling platter noise, or seeing if the drives are still mounted on your PC/Mac.

PCCLONE EX LITE FAILING UPDATE

This is a welcome update as it was lacking in previous versions of this product. ItвЂ™s housed in the oval shaped blob in the middle of the cord leading to the adapter. I should also mention at this point, that the power brick included with this adapter, has an ON/OFF switch built into the cable. Again, both drives worked fine when connected in this manner. A much more tidy configuration is pictured here with the same SATA drive and a 40gb Toshiba IDE. Even though it looks sorta messy, both drives mounted and worked as expected.ДЇiles could be copied back and forth between the drives and back and forth between my desktop computer.

The Y power cable was also needed for this particular setup. It may be hard to discern in the image, but I had to use the female to male IDE extended cable to connect the IDE drive to the adapter due to the fact that the SATA drive obstructed the 40-pin IDE connector. In the image above, you will see that I have an 80gb Hitachi SATA drive and a 80gb Western Digital IDE drive connected to the adapter at the same time. Another tidbit to remember is that 1.8 and 2.5 inch IDE drives can run by USB juice alone. Just plug the included power brick into the adapter and youвЂ™ll be fine. That could result in bad bad things happening to your drive. The main thing you should remember, is to NOT connect power to an SATAвЂ™s 4-pin power connector AND the power connector on the adapter. Connecting the adapter to your drives is not rocket science, but there are a couple of important things to be aware of that the included instruction sheet fails to mention. The other 2 connection points are for a mini sized USB cable and a 4-pin power cable. You can see it on the right side in the image above. The other main connector is for 2.5 and 3.5 inch SATA drives. One is a 40-pin connector for 1.8 and 2.5 inch notebook drives and the other is a 40-pin connector commonly used for 3.5 or 5.25 inch hard drives and optical drives (CDroms / DVDs). Two of the 5 connectors are for IDE devices. The status LEDs show Power, Read/Write activity and SATA connectivity. The button initiates the one touch backup feature (more about that in a bit). The new adapter is a 3.0 x 2.5 x 0.5 inch plastic box, that has 1 button, 3 status LEDs and 5 connectors.

And now the latest version adds one touch backup and a new compact adapter design. Earlier this Spring, yet another iteration of this added SATA drive capability. One year later, the 2nd version of this added the ability to connect 2.5 inch drives. It would only allow you to connect a 3.5 inch IDE drive to your PC or Mac. The first such I reviewed was back in 2004. ItвЂ™s the latest version of a USB 2.0 to IDE / SATA cable from.

Here is a review of a product that doesnвЂ™t appear to be all that exciting until you really require a use for it.

PCCLONE EX LITE FAILING DRIVERS

Pcclone Ex Lite Drivers For Macbook Pro.

PCCLONE EX LITE FAILING FOR MAC

Pcclone Ex Lite Drivers For Mac Average ratng: 8,6/10 3270 votes

Pcclone ex lite failing